Description

The Lawren Bodysuit View A is an ultra femme, form-fitting, semi-sheer lace bodysuit with cap sleeves, princess seams and a waist seams to accommodate difference bust sizes and torso lengths. View A also has a gusset with a snap closure.

The Lawren Bodysuit View B is the same as View A, but has no snap closure at the gusset.

Format

Pattern is available in letter and A0 formats.

Sizing

The Lawren bodysuit is available in sizes XS -4XL and cup sizes A-B, C-D, DD-F, and G-H for each alpha size.

Click here for size chart

Supplies

0.7 YDS MAIN FABRIC: Fabric that will be used for the center front and back bodice panels, and panty front and back panels. Pattern was designed to be made with fabrics that have 8-20% spandex. Recommended fabrics are stretch all over lace or stretch mesh.

2.5 YDS COMBO FABRIC: Fabric that will used for the bodice front and side panels, front panty panel, and armhole and leg openings. Pattern was designed to be made with fabrics that have 8-20% spandex. Recommended fabric is stretch galloon lace that is at least 9-10” wide.

0.7 YDS LINING FABRIC: Fabric that will be used for lining all pieces except back panty panel. Pattern was designed to be lined with fabrics that have 8-20% spandex. Recommended linings is stretch mesh. For sizes XL-2XL and cup sizes C/D, DD-F, G-I cups, recommended to use power net for front bodice and/or front panty.

4.5 YDS PICOT PANTY ELASTIC, 1/4” WIDE: Elastic that will be used for finishing the front and back neckline, armholes and leg openings.

1.5 YDS FLAT ELASTIC, 1/2” WIDE: Elastic that will be used for finishing the waist seam.

SNAP CLOSURE (VIEW A ONLY): Closure that will be used for gusset.

COTTON JERSEY (SWATCH): Fabric that will be used for gusset.

Sewing machine with straight and zig zag stitch

28mm rotary cutter (optional)

Polyester thread

Microtex or stretch needle (size depends on fabric)

Odif’s 505 spray adhesive (optional)

Zipper presser foot (for View A only)